manualshive.com logo in svg

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Поделиться
Скачать
Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя страница 145

8

SCAN OPERATION

8-2

 

■

Scan

Scanning is a versatile function that can automatically 
search  for  signals  and  makes  it  easier  to  locate  sta-
tions to contact or listen to, or to skip unwanted chan-
nels or frequencies.

 

D

About the scan function

• In the VFO mode

The  frequencies  that  are  set  as “PSKIP”  (p.  8-6)  are 
skipped during a scan.

 NOTE:

  One or more pare of the scan edge channels must 

be programmed to start a program scan.

• In the memory mode

The frequencies that are set as skip channels “PSKIP” 
and “SKIP” (p. 8-10) are not scanned.

 NOTE:

  Two or more memory channels must be programmed  

to start a memory scan.

VFO scan

 

D

• 

ALL

 (Full scan) p. 8-4

  Repeatedly scans the entire band.
  

Band

edge

Band

edge

Scan

Jump

P SKIP

P SKIP

• 

PROG 0–24

 (Program scan) p. 8-4

   Scans  the  frequency  range  which  is  programmed 

into the program scan channels (PROGRAM-CH).

  

Band

edge XXA

XXB

Band

edge

Scan edges

Scan

Jump

Jump

• 

P-LINK0–9

 (Program link scan) p. 8-4

   Sequentially  scans  the  program  scan  channels 

which are set to link in the “PROGRAM LINK” item 
in the MENU screen. (p. 10-16)

  (MENU > Scan > 

Program Link

)

Memory scan

 

D

• 

ALL

 (Memory full scan) p. 8-7

  Scans all memory channels.

• 

MODE

 (Mode memory scan) p. 8-7

   Scans  memory  channels  which  are  programmed  

with the same receiving mode as the currently se-
lected mode.

Memory bank scan

 

D

• 

ALL

 (Full bank scan) p. 8-8

  Scans all banks.

• 

BANK-LINK

 (Bank link scan) p. 8-8

   Sequentially scans the banks which are set to link in 

the “BANK LINK” item in the MENU screen.

  (MENU > Scan > 

Bank Link

)

• 

BANK-A–Z

 (Bank scan) p. 8-8

   Scans the memory channels in the selected bank.

[Duplex (DUP) scan]

The Duplex scan searches for both TX and RX fre-
quencies which are used in duplex operation.
(pp. 1-4, 1-5)

•  The “DUP–” or “DUP+” icon is displayed in the du

-

plex mode.

•  A duplex scan will not start when the frequency off

-

set is set to “0.000 MHz.”

[Tone scan]

The  tone  scan  searches  for  tone  frequencies  or 
DTCS codes that are used by stations using the Tone 
Squelch function.

•  A tone scan can be made in any mode: VFO, mem

-

ory or Call channel.

•  During a tone scan, rotate [DIAL] to switch scan di

-

rection.

Refer  to  “

Tone  Squelch  function/DTCS  code 

Squelch function

” (pp. 11-7 to 11-10) for details.

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды