Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя

Страница: 108 / 293

GPS/GPS-A OPERATION

5-27

BE CAREFUL!

•

DO NOT

touch the terminals.

• When removing the card during transceiver power

ON, the Unmounting it first is necessary. See page
12-4 for more details.

Viewing

the route on a PC Map

If you want to display the your route as you move, copy
the log file to your PC.

Turn OFF the transceiver, if it’s ON.

Lift OFF the [micro SD] slot cover on the side panel.
Push the microSD card in to release, then carefully

pull it out, to remove the card.

Insert the microSD card into the Memory Card slot

on your PC.

• To use the card on your PC, a card reader may be

required.

• The screen appears as shown to the right.

Click the “Open folder to view files” option to access

the card.

• The “ID-31” folder appears.

Double click the folder.

• Four folders appear.

Double click the “Gps” folder.

• The log files appear.
• The files are named with the time the log was start

ed, in the following format:

yyyymmdd_hhmmss.log
yyyy = year, mm = month, dd = day, hh

hour,

mm = minute, ss = second

Import the selected file to a mapping software.

• You can see your route on the software map.

Those file may not be compatible with all mapping

software.

Click

Slot cover

Click

The log files
appear

Push in the mi-
croSD card until a
click sounds.

Pull the microSD
card out.

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды