3
CONNECTING TO A WIRELESS LAN (BASIC)
3-8
Select the Virtual AP to use the WPS function. (Example: ath0)
(default: None)
2
Select [Automatic Setting by WPS] for “SSID and Security” and then click [Apply].
“A reboot is required to apply all the new settings.” is displayed.
• To use the SSID and Shared Key that are manually set to the AP-90M, select “Use the Virtual AP set
-
tings.” (default)
3
Click [Wireless Settings], and then click [WPS].
1
4. Automatically setting the SSID and Shared Key
Select
Wireless Settings > WPS
Enabling the WPS function
The “Push Button” method is used an example. (
+
p.1-12)
• If you enable the WPS function, the [WPS] button on the AP-90M’s back panel is enabled.
Changing “SSID” and “Security” on the “Virtual AP” screen (example: ath0) will be disabled.
Using the WPS (Wi-Fi Protected Setup) function, you can use the SSID and Shared Key that are automati-
cally generated in the AP-90M and the PC (WPS compatible).
• To manually set the SSID and Security without using the WPS function, see page 2-9.
Click [Reboot].
• Follow the instructions to reboot the AP-90M.
4
After the reboot is complete, click [Back].
5
Click
q
Select
w
Click
