Icom A120 24 USA, Полное руководство

Страница: 25 / 41

7
MENU MODE
7-6
SETTINGS group
■
Functions (Continued)
D
CI-V
(May not be displayed, depending on the
transceiver’s presettings.)

CI-V address
To distinguish equipment, each CI-V transceiver has
its own Icom standard address in hexadecimal code.
The IC-A120/IC-A120E’s default address is 92.
When 2 or more transceivers are controlled through a
PC at the same time, set a different address for each
transceiver.

CI-V baud rate
Set the CI-V data transfer speed.
• 4800 BPS to 19200 BPS: Sets the data transfer
speed to between 4800
bps and 19200 bps.
• AUTO: The baud rate is
automatically set
according to the data rate
of the controller.

CI-V transceive
Turn the CI-V Transceive function ON or OFF.
• OFF: Turns OFF the function.
• ON: When you change a setting on one
transceiver, the same setting is automatically
changed on other connected transceivers.
■
SCAN
D
SCAN TYPE
(May not be displayed, depending on the
transceiver’s presettings.)
Select the scan type. When you push [SCAN], the
scan proceeds according to this setting.
• NORMAL: Push [SCAN] to start a Normal scan.
• PRIORITY: Push [SCAN] to start a Priority scan.
D
RESUME TIMER
(May not be displayed, depending on the
transceiver’s presettings.)
When a received signal disappears, the scan resumes
according to this setting. Set the Resume Timer to
between 3 seconds and 10 seconds.
D
ON-HOOK SCAN
(May not be displayed, depending on the
transceiver’s presettings.)
Set the On-Hook scan function (p.3-2) to ON or OFF.
• OFF: The On-Hook scan function is OFF.
• ON: The On-Hook scan function is ON.
D
STOP/TX CH
(May not be displayed, depending on the
transceiver’s presettings.)
Select the channel that On-Hook scan stops on when
you remove the microphone from the hook, and
the channel to transmit on when you push [PTT] in
Dualwatch operation.
• SCAN CH: The displayed channel is used as the
scan stop channel during an On-Hook
scan, and as the transmit channel.
• PRIORITY CH: The Priority channel is used as the
scan stop channel during an On-Hook
scan, and as the transmit channel.