- 09 -
First, Insert the AC end of the adapter into wall outlet. Then, insert the DC
end of the adapter into the "input" interface, the screen will flash with “DC -
>” , the battery indicator will show the charging status, and the remaining
time of being fully charged is displayed at the same time. The system will
automatically detect the input power supply at the beginning of charging ,
and the remaining time will change dynamically, which is normal.
Adapter Charging
First, start the car. Then, insert one end of the male-to-male plug into the
car lighter and insert the other end into the portable power station "cigar
light" interface, the screen will flash with “car - >” , the battery indicator will
show the charging status, and the remaining time of being fully charged is
displayed at the same time.
（
Note: Do not make other operation, like
switch on the DC.
）
Car Charging
The iClever Portable Power Station boasts strict protection mechanism. If
the temperature is higher than the safe temperature (0~45
℃
/32~113
℉
),
the product will enter the waiting stage. If the internal temperature of the
portable power station reaches the safe range, the charging will start
automatically with "sus" showing on the LED display.
Waiting State of the Charging
The iClever Portable Power Station boasts multiple protection mechanisms
in terms of over-voltage, under-voltage,high / low temperature, short circuit.
If the output is suddenly interrupted, first check whether your electrical
device is over the rated power or short circuit, and then restart the device to
check whether there is electricity.
In order to save the power of the power station, please shut it down after use.
If there occurs any abnormal situation, please contact the manufacturer
How to Use the Portable Power Station