FMX 300X P-SERIES USER MANUAL
33
11-6 Network recognized but not connected
•
Change the network configuration according to the manual
11-5 Temperature readings are incorrect
•
Turn off the device; then, turn it back on
•
Ensure the device has sufficiently acclimated to the environment before
taking measurements
•
Ensure the camera has been powered on for several minutes
•
Device is at proper height
•
Ensure device is in focus
•
Adjust emissivity
•
Adjust for ambient temperature
•
Perform a NUC operation
•
Reconnect power and Ethernet cables
•
Restart the Computer
•
Ensure the camera is away from direct sunlight or reflective light
•
Try newer version of IR Flash Pro software
