icetro ISI-273SH3S, Руководство пользователя

Страница: 51 / 56

51 50
Error code type
◆ Resolution
Even though the product is functioning normally, unfamiliarity with the product or any trivial factor may cause
malfunction. Contact the customer service center if the troubleshooting does not work, the error code is not included
in the list, or the same error occurs repeatedly. Before contacting the service center, turn off the maker, wait for
5 minutes, and turn it on and operate again.
Error code Cause Troubleshooting Deactivation Operation
Er00 Mix Out No ingredient Refill the hopper with ingredient.
Automatically deactivated
Stop
Er01 Hop. Sensor Op. Cooling sensor OPEN
Sensor malfunction (Contact the service center.)
Automatically deactivated
Stop
Er02 Hop. Sensor St. Cooling sensor SHORT
Sensor malfunction (Contact the service center.)
Automatically deactivated
Stop
Er03 Cyl. Sensor Op. Cooling sensor OPEN
Sensor malfunction (Contact the service center.)
Automatically deactivated
Stop
Er04 Cyl. Sensor St. Cooling sensor SHORT
Sensor malfunction (Contact the service center.)
Automatically deactivated
Stop
Er07 EOCR
Overcurrent detected with the motor
(overcooling)
Melt the ice cream and run the maker again.
Deactivated after resetting
Resetting
Er08 High Pressure Overvoltage detected
Clean the filter and check the ventilation hole and water supply.
Automatically deactivated
Stop
Er09 noLA Not forming
Issue with coolant (Contact the service center.)
Automatically deactivated
Operation
Er10 Low Voltage
Supplied voltage exceeded more than -15%
Power supply issue (Contact the service center.)
Automatically deactivated
Stop
Er11 High Voltage
Supplied voltage exceeded more than 15% Power supply issue (Contact the service center.)
Automatically deactivated
Stop
Er13 Condensor OH
Condenser temperature too high
Check if the ventilation hole is clogged.
Automatically deactivated
Operation
Er14 Motor Belt Er. Power axis issue
Melt the ice cream and run the maker again. Deactivated after resetting
Resetting
Er15 EEPROM Error EEPROM issue
PCB issue (Contact the service center.)
Reset power Operation
Er17 Heating Error Pasteurization issue
Replace the ingredient and clean the product. Abnormal operation
Operation
Er18 Cover Error Dasher cover issue
Make sure the cover is correctly assembled.
Automatically deactivated
Stop
Er21 Motor Power Er. Motor current not detected
Product issue (Contact the service center.) Deactivated after resetting
Resetting
Er22 Power Fail Er. Power goes off. Power blackout (No action to be taken)
Deactivated after resetting
Operation
Er30 Vend Error Product issue
PCB issue (Contact the service center.)
Deactivated after resetting
Stop
Er31 Top Sensor Er. TOP sensor issue
Remove foreign object from the cup holder part. Deactivated after resetting
Stop
Er32 Down Sensor Er. DOWN sensor error
Remove foreign object from the cup holder part. Deactivated after resetting
Stop
Er33 Piston NO Er. NO input from piston
Sensor malfunction (Contact the service center.)
Deactivated after resetting
Stop
Er34
Piston NC Er.
NC input from piston
Sensor malfunction (Contact the service center.)
Deactivated after resetting
Stop
Er44 Vend Comm.
Vend PCB communication error PCB issue (Contact the service center.)
Automatically deactivated
Stop
Er50 Power IC Er. Power IC issue Sensor malfunction (Contact the service center.)
Automatically deactivated
Stop
Er51
Invertor DE Er.
Inverter out of order
Product issue (Contact the service center.)
Automatically deactivated
Stop
Er52
Invertor Comm.
Inverter communication error Sensor malfunction (Contact the service center.)
Automatically deactivated
Stop