ICE TECH PS
20
8. MAINTENANCE AND CLEANING
WARNING: Unit should always be disconnected during maintenance/cleaning
procedures.
Water Condenser
1) Disconnect machine.
2) Close water faucet.
3) Disconnect water entry/exit from condenser.
4) Prepare a solution of 50% phosphoric acid in distilled water.
5) Distribute solution through condenser. (Solution is more effective at 35°
WARNING!
DO NOT USE HYDROCHLORIC ACID
Air Condenser
1) Disconnect machine.
2) Close water faucet.
3) Clean condenser using a vacuum cleaner, soft brush and/or low
Removing scale (lime) from ice production mechanismus
1) Closet he water inlet faucet.
2) Remove lid from top lid from top of machine by pulling upwards from the rear part of the lid.
Some force is required for this it may be better
to prise it open with a flat screwdriver.
ICE TECH PS Technical Service Manual
MAINTENANCE AND CLEANING PROCEDURES
WARNING: Unit should always be disconnected during maintenance/cleaning
water entry/exit from condenser.
4) Prepare a solution of 50% phosphoric acid in distilled water.
5) Distribute solution through condenser. (Solution is more effective at 35°
DO NOT USE HYDROCHLORIC ACID.
3) Clean condenser using a vacuum cleaner, soft brush and/or low-pressure air.
Removing scale (lime) from ice production mechanismus
Closet he water inlet faucet.
Remove lid from top lid from top of machine by pulling upwards from the rear part of the lid.
Some force is required for this it may be better
to prise it open with a flat screwdriver.
Technical Service Manual
WARNING: Unit should always be disconnected during maintenance/cleaning
5) Distribute solution through condenser. (Solution is more effective at 35°-40°C).
pressure air.
Remove lid from top lid from top of machine by pulling upwards from the rear part of the lid.
