AI MDVR Installation and debug manual
20
4.1
DSM calibration
4.1.1
Correct the camera position
●
After entering the calibration interface, start the first step of
calibration. At this time, the voice broadcast: 【Please adjust
the position of the camera and stick it near the center console
so that it is within 30 degrees of the right side in front of your
seat. After completion, please click down step. 】
●
Click 【Cancel】 to cancel the calibration and return to the initial
interface of DSM;
●
Click 【Next step】 to enter the next step, that is, start the
calibration interface;
●
Click on the 【Help】floating window at the top right, and a prompt
box will pop up 【Adjust the camera position ,place it at center
console and make sure your seat is within 30 degrees right front
of it】. When you are finished, click 【Next step】, and follow
the prompts to complete Correction. After completion, click the
【Cancel】 button to return to the calibration interface.
