AI MDVR Installation and debug manual
18
2.1 Simulation speed setting
Simulation speed method
(Office test)
:
1、Set the speed source and select the vehicle.
Source:Vehicle
coefficient(X100):3600
2
、Use the remote control to quickly press 8 + F3 + F1 + 6
The simulation speed is set successfully. Plus Num displays 60 on the INFO
interface.
If it is installed in a vehicle test, there is no need to set the
simulated speed, and the device will generate a DSM/ADAS alarm based on
the actual speed.
Source:Vehicle
coefficient(X100):3600
