iCanTek iCanView270 Скачать руководство пользователя страница 52

Страница: 52 / 56

iCanView270 User’s Guide

upgraded firmware is released using manual upgrade procedure.

Followings are the procedure to apply for the manual upgrade

1) Save the upgrade system software to your PC. Upgrade software can be downloaded from iCanTek’s home

page or provided in CD.

2) Log on to administrative mode and select “Update & Reset” menu.

3) Click "Browse..." to find the files you want to use for upgrade. This will open a "Choose file" dialogue

window. The file extension is “ief”.

4) When you've found the file, click "Open." This will select the file and close the "Choose file" dialogue

window.

5) Click the "INSTALL" button. An alert message box will pop up. Click “OK” button then it will start uploading

the file. This may take some time.

6) Upgrade completion message will appear after the system upgrade has been completed.

7) Reboot iCanView270 by performing “System Reset”.

8) After rebooting, log on to the server in administrative mode again and click the “Status Report”.

9) Check the version number and release date of the iCanView270.

You can download iCanView270 system software from iCantek’s homepage.

http://www.icantek.com

Rev.2.0 (Nov.2007)

Содержание iCanView270

























































Результаты поиска

Содержание iCanView270

Отзывы:

iCanTek iCanView270, Руководство пользователя, Страница: 52 / 56

Результаты поиска

Содержание iCanView270

Отзывы: