Quick Start Guide V.1.01
Network Video
Recorder 1U/ Mini 1U
Getting Started
A.
Inspecting the Components
B.
Rear Panel Identification
Device Setup
A.
Booting Up
B.
Device Initialization
C.
Startup Wizard
Web Operation
A.
Accessing Web Interface
Remote Access
A.
P2P setup to Phone App
Appendices
A.
FAQ
B.
Toxic or Hazardous materials or
Elements
C.
Cybersecurity Recommendations
1
2
3
3
4-5
5
6
7
7
8-9
Table Of Contents
MARGIN
GUIDES
To see the guides to go:
View / Guides / Show
Guides
www.icrealtime.com
IMPORTANT SAFEGUARDS AND WARNINGS
Operating Requirement
●
Install the PoE front-end device indoors.
●
The Device does not support wall mount.
●
Do not place and install the device in an area exposed to direct sunlight or near heat
generating devices.
●
Do not install the device in a humid, dusty or fuliginous area
●
Keep its horizontal installation, or install it at stable places, and prevent it from falling.
●
Do not drip or splash liquids onto the device; don’t put on the device anything filled
with liquids, in order to prevent liquids from flowing into the device.
●
Install the device at well-ventilated places; don’t block its ventilation opening.
●
Use the device only within rated input and output range
●
Do not dismantle the device arbitrarily.
●
Transport, use and store the device within allowed humidity and temperature range.
Electrical Safety
●
Improper battery use might result in fire, explosion, or inflammation.
●
When replacing battery, make sure the same model is used.
●
Use the recommended power cables in the region and conform to the rated power
specification
●
Use the power adapter provided otherwise, it may result in injury and device damage.
●
The power source shall conform to the requirement of the Safety Extra Low Voltage
(SELV) standard, and supply power with rated voltage which conforms to Limited
power Source requirement according to IEC60950-1. Please note that the power
supply requirement is subject to the device label.
●
Connect the device (I-type structure)to the power socket with protective earthing.
1A. Inspecting the Components
Items
Detail
Inspect
Package
●
Appearance
●
Packing Materials
●
Accessories
●
Any obvious damage on box
●
Broken or distorted positions due to physical abuse
●
The accessory box should have all materials (ie: extra
SATA cables, Remote, Power cord)
Labels
●
Labels Containing the
Serial Number are
located on Device and
in box
●
The serial numbers on the Labels are in vital in
tracking the device in our database. Ensure they are
not torn or lost.
Device
●
Appearance
●
Data, power, and fan
cables, mainboard
●
Any obvious damage
●
Loose connections
