IC Bus Gasoline CE Series, Руководство по эксплуатации и обслуживанию

Страница: 224 / 241

Maintenance Intervals
Component Component Vendor / Lubrication Type Viscosity / Ambient Temperature / Notes
Rear Axle
Meritor:Synthetic from factory with Cognis
Emgard
® 75W-90 will have a tag attached to
fill plug that reads as follows: Filled with
synthetic lube. Do not mix .
Single speed - Continued.
Meritor petroleum:
0-76-A Hypoid Gear Oil
0-76-B Hypoid Gear Oil
0-76-D Hypoid Gear Oil
0-76-E Hypoid Gear Oil
0-76-L Hypoid Gear Oil
GL-5, SAE 85W-140: Above 10°F (-12°C)
GL-5, SAE 85W-140: Above -15°F(-26°C)
GL-5, SAE 80W-90: Above -15°F (-26°C)
GL-5, SAE 75W Max outside temp. 35°F (2°C): Above -40°F (-40°C)
GL-5, SAE 75W-140: Above -40°F (-40°C)
Torque Specification Charts
Disc Wheels Torque Chart
Specified Torque
Stud Size Nut Size
lb-ft N•m
22 mm Flange Nut – 33 mm Across Flats 450 - 500 610 - 678
NOTE: Do not use lubrication on dry threads. Where excessive corrosion exists, a light coat of lubricant on first three threads of
stud bolt is permitted. Keep lubricant away from:
• Hex nut
• Flange nut washer surface and flat on disc wheel
210