IC Bus Gasoline CE Series, Руководство по эксплуатации и обслуживанию

Страница: 208 / 241

Maintenance Intervals
Lubrication and Maintenance Interval Chart Symbols Key
Symbol Interval Definition
A
A interval: 5,000 miles (8,000 km)
/ 200 hours / 6 months
B
B interval: 10,000 miles (16,000 km)
/ 400 hours / 12 months
Lubrication and Maintenance Interval Chart Notes
NOTE 1: A hand-pumped grease gun should be used for
optimal grease distribution within the component joint.
NOTE 2: Kingpin thrust washers must be lubricated with
vehicle weight on tires. Kingpins and kingpin bushings must
be lubricated with weight off of the wheels and tires.
NOTE 3: Certain services are performed at Special Intervals or
in addition to A or B Service when the interval dictates.
Lubrication and Maintenance Interval: Bus — Gasoline CE Bus
System Item Intervals
Special Interval (3) : miles (km) /
hours / months
Pre-Trip Inspection Pre-trip inspection Items listed in Section
2 – Check All
Axle U-bolts – Retorque
At first 1,000 miles (1,600 km) then every
36,000 miles (58,000 km) thereafter
Drag Link – Lubricate (1) A, B
Kingpins and Bushings – Lubricate (1,2) A, B
Shock Absorbers – Inspect A, B
Suspension Fasteners / Components – Check A, B
Tie Rod Ends – Lubricate (1) A, B
Wheel Bearings – Check End-play B
Wheel Bearing-Grease Type – Repack 30,000 (48,000) / – / 6
Wheel Bearing-Oil Type – Check Level A, B
Front Axle
Wheel Bearing-Oil Type (including synthetic)
– Change Oil
60,000 (96,000) / – / 6
194