IC Bus BE Series, Руководство по эксплуатации и обслуживанию

Страница: 202 / 239

Maintenance
Lubrication and Maintenance Interval Chart Symbols Key
Table 15
Symbol Interval Definition
A A interval: 16,000 km (10,000 miles) /
300 hours / 6 months
B B interval: 32,000 km (20,000 miles)
/ 600 hours / 12 months
Lubrication and Maintenance Interval Chart Notes
Table 16
NOTE 1: A hand-pumped grease gun should be used for
optimal grease distribution within the component joint.
NOTE 2: Kingpin thrust washers must be lubricated with
vehicle weight on tires. Kingpins and kingpin bushings must
be lubricated with weight off of the wheels and tires.
NOTE 3: Certain services are performed at Special Intervals or
in addition to A or B Service when the interval dictates.
Lubrication and Maintenance Interval: Bus — Recommended Synchronized Intervals
System Item Intervals
Special Interval (3) : km (miles) / hours / months
Pre-Trip Inspection Pre-trip Inspection Items listed in Section 2 – Check All
Wheel Bearing-Oil Type – Check Level A, B
Suspension Fasteners / Components – Check A, B
Tie Rod Ends – Lubricate (1) A, B
Drag Link – Lubricate (1) A, B
Kingpins and Bushings – Lubricate (1,2) A, B
Shock Absorbers – Inspect A, B
Axle U-bolts – Retorque At first 1,600 km (1,000 miles) then every 58,000
km (36,000 miles) thereafter
Wheel Bearing-Grease Type – Repack 48,000(30,000) / – / 6
Wheel Bearing-Oil Type (including synthetic) – Change Oil 96,000(60,000) / – / 6
Front Axle
Wheel Bearings – Check End-play B
190