IC Bus BE Series, Руководство по эксплуатации и обслуживанию

Страница: 134 / 239

Operation
Parking Brake / Wheelchair Lift Interlock – Retracting and
Stowing Operation
The vehicle cannot be moved (the Parking Brake cannot be
released), until the following operations are performed:
1. Turn ignition on.
2. Retract and stow the Wheelchair Lift. The LIFT DOOR
Instrument Panel Gauge Cluster indicator will be turned
Off.
3. Close the lift door.
4. Depress the service brake and press and hold the button
on the gearshift lever handle and select “R” (Reverse) or
“D” (Drive) position.
5. For Air Brakes, push in on the Parking Brake knob
(Park indicator on Instrument Panel Gauge Cluster will
turn off).
6. For Hydraulic Brakes, push and hold the Parking
Brake knob until the Park indicator turns off.
7. Lift foot from the brake pedal, and then slowly press the
accelerator pedal.
Parking Brake / Wheelchair Lift (Optional) Alarm
• The Instrument Panel Gauge Cluster alarm will beep
continuously if the Wheelchair lift door is extended
AND
• The Parking Brake is released.
NOTE: When either the Powered Parking Brake is applied,
or the Wheelchair Lift door is closed, the Instrument Panel
Gauge Cluster alarm will immediately stop beeping.
Antilock Braking System (ABS)
WARNING
To prevent property damage, personal injury,
and / or death, Antilock Brake System(s) (ABS)
are designed to enhance overall vehicle safety
when a vehicle is driven within its safe operating
limits.
ABS cannot compensate for a vehicle
that is being driven beyond the physical limits
of control. Drivers operating an ABS-equipped
vehicle should employ safe driving practices and
assume no additional driving risks.
WARNING
To prevent property damage, personal injury,
and / or death, do not rely on the Antilock Brake
System (ABS) to interrupt vehicle engine brake
on slippery road surfaces. Turn these devices
off during hazardous driving conditions. Failure
to follow this warning may cause wheel slippage
and / or loss of vehicle control.
122