Last update:
2022-06-13
IBS
Precision Engineering • Eindhoven • NL • +31 40 290 1270
User Manual |
P9
12
Specifications
Parameter
Specification
Notes
Power Requirement
15-24 VDC, 2.5W
Resolution @
15kHz
(Typical)¹,²
Nonferrous
0.006 to 0.008%F.S. (ECL202)
0.3 μm or higher (ECL202e)
Ferrous
0.007 to 0.1%F.S. (ECL202)
0.3 μm or higher (ECL202e)
See calibration sheet for specifics
Linearity¹
±0.2%F.S.
Error Band¹
±0.4%F.S.
Analog Output¹
0-
10 VDC, 0 Ω, 15 mA max
Analog Output Update Rate
15 μS
Setpoint Switch Output
Solid state switch closure:
On state: 2.5 Ω, 250 mA max
Off state: 30 VAC/60 VDC max
Remote Setpoint and Offset Inputs 15-24 VDC to activate, 3-7 mA
Opto-isolator inputs
Driver Operating Environment
4°C-50°C, IP40
Probe
Operating
Environment
Standard
Probes
-25°C to +125°C, IP67
High Temp.
Probes
-25°C to +200°C, IP63
¹Actual values depend on probe and range and are listed on the calibration certificate shipped with the product.
Contact Lion Precision for replacement certificates.
²In High EMI environments (10 V/m), output noise levels may rise to 30 mV causing resolution to be reduced to
0.3%.
