
51
13. What to do if there’s a problem
Problem
Possible cause
Remedy
The Digital TENS is switched on
but no display is visible and no
stimulation can be felt.
The battery has not
been inserted.
Insert the battery
The battery has been
inserted incorrectly.
Insert the battery correctly.
The battery is dead.
Change the battery.
The Digital TENS is
faulty.
Send the Digital TENS to our
Service Department – see
Service
and Warranty.
The Digital TENS is switched on
and a display is visible but no
stimulation can be felt.
The pulse strength is set
too low.
Increase the pulse strength.
The cables are not
properly connected.
Check all the cable connections
and insert the cables firmly.
A supply cable or an
electrode is faulty.
Change the supply cable or
electrode.
The Digital TENS is
faulty.
Send the Digital TENS to our
Service Department – see
Service
and Warranty.
The self-adhesive electrode
does not stick.
The adhesive on the
electrode has dried up.
Change the self-adhesive
electrode.
14. Re-ordering accessories
Self-adhesive electrodes are available from specialist shops or can be ordered
by post from ibp GmbH quoting the following code number:
Elektropads, 40 x 40 mm, set of 4, ibp code 20301.
(For the address see the section of this manual on
Service and Warranty
.)
Содержание DIGITAL TENS
Страница 10: ...39 7 8 On the reverse not visible ...