manualshive.com logo in svg

IBP DIGITAL TENS, Инструкция по эксплуатации, Страница: 17 / 28

Поделиться
Скачать
IBP DIGITAL TENS Скачать руководство пользователя страница 17

 46

4.  Setting the times:

•

  Setting the cycle switch-on time: 

Press the 

SET

 button until the 

ON 

display for the cycle switch-on 

time lights up and flashes.

•

  Press the 

RATE

 button ▲ or ▼ until the display shows the 

required cycle switch-on time. 

You can set the cycle switch-on time for anything from 1 to 30  

seconds. 

Each time the button is pressed, the display jumps in 1 sec intervals 

to the next possible higher or lower adjustment.

•

  Setting the build-up period (ramp): 

Press the 

SET

 button until the 

RAMP

 display for the build-up period 

lights up and flashes.

•

  Press the 

RATE

 button ▲ or ▼ until the display shows the  

required build-up time 

You can set the build-up time for anything from 1 to 8 seconds. 

Each time the button is pressed, the display jumps in 1 sec intervals 

to the next possible higher or lower adjustment.

•

  Setting the cycle switch-off time: 

Press the 

SET

 button until the 

OFF

 display for the cycle switch-on 

time lights up and flashes.

•

  Press the 

RATE

 button ▲ or ▼ until the display shows the  

required cycle switch-off time. 

You can set the cycle switch-off time for anything from 1 to 30 seconds. 

Each time the button is pressed, the display jumps in 1 sec intervals 

to the next possible higher or lower adjustment.

•

  Saving all the time settings: 

Press the 

ENT

 button briefly.  This saves your settings.

10.3 Selecting the operating mode

We recommend that all your treatment parameters, including pulse frequency, 

pulse width and pulse strength, are individually checked and set by a doctor or 

therapist.  
For the treatment to work successfully it is necessary for the patient to  

experience a noticeable tingling feeling or vibration on the skin.  If the success 

of the treatment begins to wane after a time because the body accustoms itself 

to the current settings, a doctor or therapist can re-check and re-set the  

treatment parameters.  In such a case it may be sensible also to change the 

operating mode, i.e. select a modulated operating mode.

  If a doctor or therapist is giving the treatment, s/he can monitor the  

treatment continually and if necessary reset the parameters.

1.  Switch on the Digital TENS. 
2.  Press the 

MODE

 button until the symbol for the required operating mode 

flashes on the display. 

You can select from five TENS and two EMS operating modes. 

Each time you press the button the display will jump to the symbol  

for the next operating mode.

Содержание DIGITAL TENS





























Отзывы:

Нет отзывов