IBP DIGITAL TENS, Инструкция по эксплуатации, Страница: 15 / 28

44
NB: Make sure that the current settings are as specifi ed by your
doctor or therapist.
8. Set the pulse intensity for Channel 1 and Channel 2 by turning the left and
right on/off knobs slowly clockwise until the stimulation reaches a pleasant
level of intensity.
9. Reduce the pulse intensity or switch off the Digital TENS if you begin
to fi nd the stimulation unpleasant.
10. Ending the treatment:
When the treatment duration as set has expired, the stimulation will cease
automatically and the display on the Digital TENS will go out.
Switch off Channel 1 and Channel 2 of the Digital TENS by turning the left
and right on/off knobs anticlockwise until you hear a click.
11. Remove the self-adhesive electrodes from the skin by pushing a fi ngertip
under each electrode and lifting it off in the direction of the hair growth.
Always pull the self-adhesive electrodes by the plaster and never by
the wires. The wires may break if subjected to too much mechanical
stress.
12. Stick the self-adhesive electrodes back onto the protective fi lm and store
them in the re-sealable bag until the next treatment session.
13. Rub a little body lotion onto each point on the skin where the self-
adhesive electrodes were fi xed, if needed.
14. Put the Digital TENS and the accessories back into the storage case.
15. Store the Digital TENS in a safe place out of the reach of children and
away from direct sunlight and damp until the next treatment session.