Ibml ImageTracDS 1210, Руководство пользователя

Страница: 65 / 123

Operation 3-26
ImageTracDS 1210/1155 User’s Manual
3.5 Imprinting Operation
Features of the imprinting are described below.
These features are controlled by TWAIN driver.
Item Content
Print side Printing is available for front and rear, and print a document both side simultaneously.
Printable
Characters
- Numbers (0-9), alphabet (A-Z), space
-
Special mark “■ ■” for anti -redundant scan
- Other marks : ！ “ ＃＄％＆ ‘ （ ）＝～｜ ‘ ｛＋＊｝＜＞？＿－＾￥＠「」；： , . [ ] ／
Character size Standard, double width size character
Print position
Front
- Feeding direction
Can be specified optionally from the top or bottom edge of document for each job
group or each sheet group
- Document width direction
Outside: 11±2 mm from the left edge of document.
Inside: 21±2 mm from the left edge of document.
Rear
- Feeding direction
8±2 mm from the bottom edge of document
- Document width direction
11±2 mm from the right edge of document.
Contents Serial numbers whose initial number is specified, etc.
Print location 2 locations (Location-1, Location-2)
Deletion Marks similar to “V” will be printed continuously for deletion
Direction Two directions (Forward/Backward)
Number of
Characters
Max 38 characters(1 location), Max 17 characters each(2 locations)
Note for
“■ ■”
- Space used for these marks are equal to 6 digits for standard font size and 3
digits for larger font size
- In case of printing only
“
space
”
,
“■ ■”
will not be not printed.
Color red / black