manualshive.com logo in svg

IBM x3850 X5, Руководство по внедрению

Поделиться
Скачать
IBM x3850 X5 Скачать руководство пользователя страница 295

Chapter 6. IBM System x3850 X5 and x3950 X5 

275

To order a recovery CD, contact your local support center at the following website:

http://www.ibm.com/planetwide/region.html

 

6.10.3  Installing the ESX 4.1 or ESXi 4.1 Installable onto x3850 X5

Before installing any VMware OS, always refer to the latest OS support information that is 
contained on the IBM ServerProven site. You can obtain IBM ServerProven information at the 
following website:

http://ibm.com/systems/info/x86servers/serverproven/compat/us/nos/vmwaree.html

 

VMware supported versions based on x3850 X5 hardware configuration

IBM ServerProven provides general OS support information for the x3850 X5. Table 6-11 lists 
the versions of VMware ESX that are supported on the various x3850 X5 hardware 
configurations.

Table 6-11   WMware OS versions supported based on x3850 X5 hardware configuration

Nonuniform memory access (NUMA)

When installing any supported version of the ESX Server OS onto the x3850 X5, the memory 
must be balanced across all processors in the system. This rule applies to 1-node, 2-node 
configurations, and x3850 X5 with MAX5 attached. Failure to follow this rule will prevent the 
OS from installing correctly. See 2.3.4, “Nonuniform memory architecture (NUMA)” on 
page 26 for details.

Installing the ESX/ESXi 4.1 Installable edition onto x3850 X5 with MAX5

To correctly configure and install ESX/ESXi 4.1 Installable editions of ESX/ESXi Server, follow 
these instructions:

1. Connect the MAX5, as described in 6.4, “Attaching the MAX5 memory expansion unit” on 

page 230.

2. Configure memory scaling. Systems running VMware ESX/ESXi Server must use 

Non-Pooled mode in the MAX5 Memory Scaling option. See “1-node with MAX5” on 
page 261 for instructions to configure the MAX5 Memory Scaling option. 

3. Configure your RAID arrays. 

4. Use the following procedures to install ESX/ESXi 4.1 Installable on an x3850 X5 with 

MAX5:

– “Installing the ESX 4.1 OS” on page 276
– “Installing the ESXi 4.1 OS” on page 278

VMware OS

One-node

Two-node

x3850 X5 with MAX5

VMware ESX Server 4.0 Update 1

Yes

No

No

VMware ESXi Server 4.0 Update 1

Yes

No

No

VMware ESX Server 4.1

Yes

Yes

Yes

VMware ESXi Server 4.1

Yes

Yes

Yes

Tip: If your System has 1 Terabyte (TB) or greater of memory, see the following web page:

http://ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5084935

 

Содержание x3850 X5





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды