IBM x3550 - System - 7978, Руководство по диагностике и обслуживанию

Страница: 69 / 204

Removing and installing the internal CD-RW/DVD drive
Removing the CD-RW/DVD drive
To remove the CD-RW/DVD drive, complete the following steps.
CD/DVD drive
Release button
1. If you are replacing a removed drive with a new drive, make sure that:
v
You have all the cables and other equipment that is specified in the
documentation that comes with the new drive.
v You check the instructions that come with the new drive to determine whether
you must set any switches or jumpers on the drive.
v
You have removed the drive retainer clip on the side of the old drive and
have it available for installation on the new drive.
Note: If you are installing a drive that contains a laser, observe the following
safety precaution.
Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices,
or transmitters) are installed, note the following:
v
Do not remove the covers. Removing the covers of the laser product
could result in exposure to hazardous laser radiation. There are no
serviceable parts inside the device.
v
Use of controls or adjustments or performance of procedures other
than those specified herein might result in hazardous radiation
exposure.
Chapter 4. Removing and replacing server components
51