IBM X 330 Series, Руководство по установке

Страница: 16 / 76

4
IBM xSeries 330 Type 8675: Installation Guide
• While the device is still in its static-protective package, touch it to an unpainted
metal part of the system unit for at least two seconds. (This drains static electricity
from the package and from your body.)
• Remove the device from its package and install it directly into your system unit
without setting it down. If it is necessary to set the device down, place it in its
static-protective package. Do not place the device on your system unit cover or
on a metal table.
• Take additional care when handling devices during cold weather because heating
reduces indoor humidity and increases static electricity.
Major components of the xSeries 330
The following illustration shows the locations of major components in your server.
Microprocessor
Terminator card
Fans
Hard disk drive
filler panel
Hard disk drive
Memory module
Air baffle
Light Path
Diagnostics panel
Heat sink
Clip