IBM Turbo 16/4 Token-Ring PC Card 2, Руководство пользователя

Страница: 38 / 123

Table 4. Novell NetWare Driver Parameters (continued)
Parameter Explanation
RT= Route Switching Mode. This parameter indicates whether the driver
should enable code that attempts to send routable traffic directly to
a destination rather than through the router. This can improve the
performance of these connections and reduce the workload at the
router. If the value is Disable, all routable frames will be sent
through the router.
Valid values:
A Automatically determines whether to use Peer or Client
mode.
P Communicates with a peer destination station to establish
a direct path.
C Uses an MSS server to determine the direct path.
D Deactivates the route switching function for this PC Card.
The default is D.
RTTS= Route Switching Table Size. This parameter specifies the number of
entries allowed in the route table kept for Route Switching support.
This should be set equal to or greater than the number of remote
stations this station will send data to using routable IP frames. If it
is set too low, some of the traffic that could be sent directly will
instead be sent through the router.
Valid values: 16-1024
The default is 1024.
RTSM= Route Switching IP Subnet Mask. This parameter contains a
character string specifying the IP subnet mask for the IP subnet to
which this PC Card will attach. This value is entered as an IP
dotted-decimal value (for example, 255.255.255.0). This is a
mandatory parameter when the RTSWMode parameter is set to
Auto or Peer.
Valid values:
xxx.xxx.xxx.xxx
A dotted-decimal IP network number (15 characters
maximum).
Disable
When not in use.
The default is Disable.
RTHT= Route Switching Holding Time. This parameter specifies the Route
Switching information holding time value. This determines how often
a remote station must refresh its Route Switching information which
pertains to this station.
Valid values: 2 to 20
The default is 20.
22
Turbo 16/4 Token-Ring PC Card 2