IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, Руководство пользователя, Страница: 85 / 248

Table 24. ModifyExportPath command (continued)
Command Explanation Command Specific Options
--[newExportName <NAME>]
A new name for the export path
[--enablement STATUS]
Export the enablement status.
Valid values are enabled and
disabled.
--secured STATUS
Port security status allows only
connections from port 1024 and
below. Valid values are Yes and
No.
[--uid ID] The user ID to use for anonymous
users (when squash is enabled).
[--gid ID] The group ID to use for
anonymous users (when squash is
enabled).
--allowedhosts
<(FIELD=VALUE...),...(...)> Comma-delimited list of IP
addresses of the allowed hosts
(without spaces). Each host is in
the form of a tuple, with the
following required fields: IP,
permission = r / rw, mapping =
root_squash / no_root_squash.
Note:
Linux users must add the
backslash character (\) before
special characters such as (,) and *.
Example:
ModifyExportPath
►► ./ptcli ModifyExportPath --ip 9.148.220.45 --loginFile h:\ptcli\ptadmin Command Specific Options ►
► Command Specific Options ►◄
Command Specific Options:
--fsName <NAME> --exportName <NAME>
[--newExportName] <NAME>
Command Specific Options:
[--enablement STATUS] <Enabled or Disabled>
--secured STATUS <Yes or No> ►
►
[--uid ID] <ID> [--gid ID] <ID>
--allowedHosts <LIST>
Table 25. ListExportPaths command
Command Explanation Command Specific Options
ListExportPaths Print the list of export
paths on a given system. Name Explanation
--fsName <NAME> File system name (taken
from "ListFileSystems"
output).
Chapter 8. Managing and monitoring ProtecTIER through the CLI
65