IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, Руководство пользователя

Страница: 71 / 248

Chapter 8. Managing and monitoring ProtecTIER through the
CLI
This chapter describes how to query and configure the system via the command
line interface (CLI), and to receive various statistics about the ProtecTIER system.
This information can provide valuable insight to the administrator on the
performance, capacity, configuration and operation of the system, and can be
accessed by other management applications.
A CLI is provided for adminstrators who either prefer a text interface or want to
automate capture of statistical information.
Understanding the syntax diagrams
A syntax diagram uses symbols to represent the elements of a command and to
specify the rules for using these elements.
Syntax diagrams
Main path line
►► ►◄
Begins on the left with double arrowheads (>>) and ends on the right with
two arrowheads facing each other (><). If a diagram is longer than one
line, each line to be continued ends with a single arrowhead (>) and the
next line begins with a single arrowhead. Read the diagrams from
left-to-right, top-to-bottom, following the main path line.
Keyword
►► ptcli ►◄
Represents the name of a command, flag, parameter, or argument. A
keyword is not in italics. Spell a keyword exactly as it is shown in the
syntax diagram.
Required keywords
►► ./ptcli <command name> <--server options>
<processing options> <--command specific options>
►◄
Indicate the parameters or arguments you must specify for the command.
Required keywords appear on the main path line. Mutually exclusive
required keywords are stacked vertically.
Optional keywords
►►
-h -help -?
►◄
© Copyright IBM Corp. 2012, 2016
51