IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, Руководство пользователя, Страница: 39 / 248

4. If the Press enter to continue prompt displays, the time zone list is too long
to display on the screen at once. Press Enter to advance the list.
5.
At the
Please choose a timezone:
prompt, type the number that corresponds
to your timezone and press Enter to return to the Date, Time, Timezone &
Timeserver(s) configuration
menu. Type:
c
for commit and press Enter.
The current time, date, and timezone settings display for review.
6. At the
Do you wish to apply those settings? (yes|no)
prompt, type:
yes
and
press Enter.
The following message appears:
The cluster & VTFD services on all nodes
must be stopped in order to continue. Do you wish to continue? (yes|no).
Type: yes and press Enter.
A series of status messages appears as the services are stopped and restarted.
This process might take up to 10 minutes. When the service restart is complete,
the
Press the ENTER key to continue... message appears.
7.
Press Enter to continue and return to the ProtecTIER Configuration (...) menu.
Setting the date and time
Each server contains a battery that must be calibrated.
About this task
Use the procedures in this task to check the time and date on the server. If
necessary, change the settings to match the time and date at your location.
Important:
With Version 3.3.6 and later, you must apply each change you make to
the timezone, date and time, and time server individually before proceeding to the
next task.
Procedure
1. On the ProtecTIER Configuration (...) menu, select the Update Time, Date,
Timezone & Timeserver(s)
option. Type the corresponding number for this
selection and press Enter.
The Date, Time, Timezone & Timeserver(s) configuration menu, displays:
2. On the Date, Time, Timezone & Timeserver(s) configuration menu, select the
Set date & time
option. Type the corresponding number and press Enter.
3. When prompted for the date:
v
If the default date [displayed in brackets] is correct, press Enter.
v If the default date is incorrect, type the current date in DD/MM/YYYY
format and press Enter. For example,
09/01/2012 .
4. When prompted for the time:
v If the default time [displayed in brackets] is correct, press Enter.
v If the default time is incorrect, type the current time in HH:MM:SS format
and press Enter. For example:
08:32:58
.
5. At the Please choose: prompt, commit your date and time settings To commit,
type: c and press Enter.
The current time, date, and timezone settings display for review.
6.
At the
Do you wish to apply those settings? (yes|no)
prompt, type:
yes
and
press Enter.
Chapter 2. Completing the ProtecTIER system setup for new installations
19