IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY страница 186 Скачать руководство пользователя

Страница: 186 / 248

About this task

Use the

analyze_sessions

utility, under the

/opt/dtc/app/utils/

directory, to

monitor the data statistics for the backup and deduplication sessions of your
ProtecTIER system.

Procedure

Change to the

/opt/dtc/app/utils/

directory.

Type

./analyze_sessions

at the command prompt.

Usage options

Explanation

-n

Number of previous months back to scan.

-sd

The <source directory> option is for
working on compressor (.csv) files in
locations other than the default
miscellaneous directory of compressor

-io

(I/O throttle in MB/s) This tool runs on
the machine, so that the available
resources from the machine are not
depleted. The default value is 5MB/s.

-daily

Adds a section with a line for each day.

-hourly

Add a section with a line for each hour.

-d

After the session is idle for more than <x>
(1-20 minutes) amount of time, a new
session is started.

-s

(Start date) Date format is
YYYY-MM-DD-HH-MM, e.g.
2006-09-30-05-23. The processed times are
startTime <= time <= endTime.

-e

(End date) Date format is
YYYY-MM-DD-HH-MM, e.g.
2006-09-30-05-23. The processed times are
startTime <= time <= endTime

-o

<output file name> The output data is
dumped into this file, instead of output on
the screen.

-min

Minimal output displays "all" with the
grand totals and headers. The daily and
hourly flags are overridden.

Nosessionfilter

Includes all sessions, even the small ones,
in the sessions list. For example, if you
have a session that is smaller than 1MB, it
is included in the output. (The minimum
file size with the session filter is 1MB.)

An output file containing statistics for the recent sessions is generated at the
following location:

/ptwork/<server name>-<date>-<time>.csv

during the

respective time period.

Results

The following is an example of running the

analyze_sessions

utility with the

-l

and

-i

server options to display a list of the cartridge names and their totals in the

report:

166

IBM TS7650G Deduplication Gateway for ProtecTIER

: User's Guide for FSI Systems

Содержание TS7650G PROTECTIER DEDUPLICATION GATEWAY
























































































































































































































































Результаты поиска

Содержание TS7650G PROTECTIER DEDUPLICATION GATEWAY

Отзывы:

Похожие инструкции для TS7650G PROTECTIER DEDUPLICATION GATEWAY

Бренды по названию

Популярные бренды

IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, Руководство пользователя

Результаты поиска

Содержание TS7650G PROTECTIER DEDUPLICATION GATEWAY

Отзывы:

Похожие инструкции для TS7650G PROTECTIER DEDUPLICATION GATEWAY

Бренды по названию

Популярные бренды