IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, Руководство пользователя, Страница: 122 / 248

Note: A repository cannot be a grid member of more than one grid.
2.
Type the network replication IP address of the repository in the Replication IP
address
field.
3. Enter the username and password of the repository (User name: ptadmin and
Password: ptadmin ).
4. Click Ok. The repository is added to the replication grid.
5. If you have additional repositories to add to the replication grid, repeat this
procedure for each one.
What to do next
Go on to “Working with replication groups in FSI” on page 103.
Removing a repository from a grid
You can use the ProtecTIER Replication Manager to remove a repository from a
grid.
About this task
Note: Before removing a repository from a grid, carefully consider the potential
effects on the system configuration. Once the source repository is removed from
the grid, all the bandwidth reduction and replication deduplication information is
deleted. The relationship between the original and replicated cartridge pair is lost
and they cannot be updated in the same pair. If the repository rejoins the same
grid, it looks like a new repository in the grid with a new ID, and all data should
be replicated from beginning by new policies. Therefore, removing a repository
from a grid is an operation you should plan with a PT specialist.
A repository can be removed from a grid only if it is a single node repository. See
“Modifying a Replication Group for FSI” on page 105.
To remove a repository from a grid:
Procedure
1. From the Grids Management view, click the repository you want to remove.
2. Select Repository > Remove repository from grid. The Remove repository
from grid
window is displayed.
3. Complete the login information by typing the User name and Password of the
repository.
4. Click Ok. The repository is removed from the grid.
What to do next
Note: Remove a repository from a grid, without coordination with the Replication
Manager, only if the ProtecTIER Replication Manager thinks that the repository is
not a part of the grid already, or the Replication Manager was destroyed and is not
meant to be restored. To remove a repository from a grid without coordination, see
“Forcing a repository to leave a grid” on page 195.
Updating the replication IP address of a grid member
Complete this task to update the Replication Manager about a change in the
replication IP address of a grid member.
102
IBM TS7650G Deduplication Gateway for ProtecTIER
®
: User's Guide for FSI Systems