manualshive.com logo in svg

IBM TotalStorage SAN256N Director 2045-N16, Руководство по установке и обслуживанию, Страница: 65 / 157

Поделиться
Скачать
IBM TotalStorage SAN256N Director 2045-N16 Скачать руководство пользователя страница 65

Chapter 3. Installation

45

Power on the Enterprise Manager workstation PC

1.  Verify that the Enterprise Manager workstation PC (computer and monitor) AC Power 

switch is in the OFF position.

2.  Plug the Enterprise Manager workstation PC power cord into the customer’s AC 

power receptacle.

3.  Power on the Enterprise Manager workstation PC. Ensure the PC boots up, and 

Windows operating system is functioning properly.

4.  Set any other controls on the Enterprise Manager workstation PC as appropriate, 

e.g., monitor brightness, contrast.

External modem installation

Note:  The external modem, connected to COM 1 on the workstation, is used for RSM 

applications. The internal modem, installed inside the workstation, is used for the 
Call Home feature of the SAN256N director. Both modems are operational using 
only one customer-supplied phone connection. Two external modem installations 
are shown in this section:

•  MultiTech Systems MultiModem MT5634ZBA - Global

•  MultiTech Systems MultiModem MT5600BA - Global

MultiTech Systems MultiModem MT5634ZBA - global external modem 
(North American/International Usage)

Use the following procedures to install the MultiTech Systems MultiModem MT5634ZBA 
- global external modem, modem driver, and global wizard utility.

Installing the MultiTech MT5634ZBA - global external modem

1.  Unpack the contents of the modem packing box.

2.  Verify that the workstation is turned OFF during this modem installation.

3.  Install the four plastic feet onto the bottom of the modem. Peel the feet from the paper 

carrier strip and press the feet into the recesses on the bottom of the modem.

4.  Using a DB-25 to DE-9 RS-232 serial cable, plug the DB-25 connector end into the 

modem.

5.  Plug the DE-9 connector end of the cable into Serial Port A (COM 1) of the 

workstation.

6.  Insert the barrel-shaped power plug into the power jack on the modem. Plug the 

power module into a standard AC power wall outlet.

7.  Connect the customer’s supplied phone line to the line port of the external modem.

Содержание TotalStorage SAN256N Director 2045-N16






























































































































































Отзывы:

Нет отзывов