IBM TotalStorage SAN256N Director 2045-N16, Руководство по установке и обслуживанию, Страница: 46 / 157

SAN256N Director 2045-N16
26
Unpacking the SAN256N director when shipped in a cabinet
When the SAN256N director is shipped in a 70-inch high cabinet (40U), it is packed with
shipping blankets, metal straps, and a protective anti-static plastic shipping bag.
Remove the metal straps and shipping blankets.
Leave the anti-static plastic shipping bag and nylon straps in place on the cabinet until a
IBM Field Service representative, or a certified Third Party Field Service Organization
representative, is present to unpack the cabinet. The Field Service representative will
then continue with the unpacking and removal of the nylon straps and protective plastic
shipping bag from the cabinet. Discard the plastic bag and nylon straps in accordance
with local regulations.
Locate the remaining shipping boxes that contain the AC power cords, SFPs, horizontal
and vertical cable guides, Customer’s Spares Kit, and other cabinet installation parts.
The ESD wrist strap assembly is shipped in a protective plastic bag attached, via a
plastic tie-wrap, to the inside right panel of the front of cabinet.
Unpacking the SANC40 cabinet when shipped by itself
When the SANC40 cabinet is shipped by itself, it is shipped in a protective anti-static
bag inside a triple-wall (90 lb weight) cardboard carton with two 1/2-inch steel banding
straps securing the cardboard carton to a wooden skid. Remove the metal straps,
cardboard carton and foam inserts. Leave the anti-static plastic shipping bag in place on
the chassis until a IBM Field Service representative, or a certified Third Party Field
Service Organization representative, is present to unpack the chassis. The Field Service
representative will then continue with the unpacking and removal of the nylon straps and
protective plastic shipping bag from the chassis. Discard the plastic bag and nylon
straps in accordance with local regulations.
Note: When removing shipping materials from the chassis or cabinet and unpacking
boxes shipped with the chassis or cabinet, place discarded shipping materials
and boxes in one area, away from the installation work area. Maintaining a neat
installation work area will keep access to the chassis or cabinet and cables free
from blockage and trash.
International shipments
When the SAN256N director is shipped internationally, an international transportation
carrier is used who specializes in moving and transporting electronic and electronic
ESD-sensitive equipment. The SANC40 cabinet is shipped in a protective anti-static bag
inside a corrugated (90 lb weight) cardboard box mounted on a wooden skid.
For detailed information describing the transportation carrier’s responsibilities, refer to
the IBM TotalStorage SAN n-type Director Series Site Planning Guide.
Moving the equipment
Refer to the SAN256N director Site Planning Grid for the customer’s building, floor, and
room destination for the SAN256N director. This worksheet is completed during the site
planning process.
The customer or shipping carrier (noted on the sales order) is responsible for
transporting the SAN256N director equipment to its final destination location at the
customer’s site, before removing the SAN256N director from the shipping crate and skid.