IBM TotalStorage DS4800, Инструкция по установке, эксплуатации и обслуживанию

Страница: 32 / 250

Line cord jumpers are power cables used to connect the DS4800 RAID
controller units to the IBM-certified rack power distribution units (PDUs)
installed in the rack cabinet.
– Eight 4 Gbps SFP modules (These SFP modules are already installed in the
DS4800 drive (4) and host (4) ports.)
– One rack-mounting hardware kit, including:
- Two rails (right and left assemblies)
- Eight M5 black hex-head screws
– Wrap plug and coupler kit
Use the wrap plug and coupler kit for FC link diagnostics. See the IBM
System Storage DS4000 Problem Determination Guide for more information.
Attention: The DS4800 does not ship with region-specific power cords. You
must obtain the IBM-approved power cords for your region. See Appendix D,
“Power cords,” on page 193 for the IBM-approved power cords for your region.
v Software and documentation
– Host software attachment kit
Depending on the DS4800 model you order, your DS4800 will ship with either
the Microsoft
®
Windows
®
host software attachment kit or with your choice of
host software kits (Windows, AIX
®
, Linux
®
, Netware, SUN Solaris, HP-UX,
Linux on POWER
™
, or VMware). The host software kit grants you permission
to attach host servers using the appropriate operating system to the DS4800.
The kit includes a DS4000 Storage Manager Version 9 Support CD that has
the appropriate IBM DS4000 Storage Manager host software. The CD also
contains includes firmware, online help, and publications in Adobe Acrobat
Portable Document Format (PDF). (For a list of available IBM DS4000
publications, see Appendix A, “Additional DS4000 documentation,” on page
177.)
If you order more than one host software kit, the additional kits may also be
shipped in the DS4800 shipping box.
Note: Depending on your DS4800 model, you may need to purchase the
appropriate host software kit for your host server operating system.
Contact your IBM representative or reseller for more information.
– An eight storage partition premium feature activation kit for models 80H, 82H,
84H and 88H. For models 80A, 82A, 84A and 88A, the storage partition
premium feature activation kit correlates to the number of storage partitions
that you ordered
– IBM System Storage DS4800 Storage Subsystem Installation, User’s, and
Maintenance Guide
– IBM System Storage DS4800 Storage Subsystem Installation and Cabling
Overview
– IBM Safety Information
– IBM License Agreement
– Statement of Limited Warranty
If an item is missing or damaged, contact your IBM reseller or your IBM marketing
representative.
If you have not already done so, record your storage subsystem serial number,
machine type and model number, and RAID controller MAC addresses in
Appendix B, “Records,” on page 187. The serial number, machine type, and model
4
IBM System Storage DS4800 Storage Subsystem: Installation, User’s, and Maintenance Guide
|
|
|
|
|
|
|
|
|
|
|