IBM TotalStorage 3494 Tape Library, Руководство оператора

Страница: 31 / 605

2
Tape Drives
The 3494 Tape Library uses the following tape drives:
v
3490E C1A, C2A, (see Figure 3 on page 6) or F1A (not shown) Tape
Drives
v 3590 B1A Tape Drives or 3590 E1A Tape Drives, with or without a 3590
A00, A50, or A60 Controller or a 3592 J70 Controller
v
3590 H1A Tape Drives, with or without a 3590 A60 Controller or a 3592
J70 Controller
v 3592 J1A Tape Drives, with or without a 3590 A60 Controller, or 3592
E06 Tape Drives, 3592 E05 or J1A tape drives with or without a 3592 J70
Controller.
Note:
The 3590 A60 Controller and the 3592 J70 Controller are not
supported in the 3494 L14 Frame.
3
Rail System
The rail system carries the cartridge accessor through the 3494 Tape
Library. The rail system consists of two horizontal rails, one at the top and
one at the bottom of the 3494 Lxx Frame.
4
Convenience I/O Station
An optional convenience I/O station feature permits inserting or ejecting
cartridges without interrupting normal automated operations.
Two convenience I/O station features are available:
v
A 10-cartridge convenience I/O station (see Figure 3 on page 6 or
Figure 4 on page 6)
v A 30-cartridge convenience I/O station (not shown)
Note: Export and Import operations in the 3494 B18, B10, and B20 VTSs
with FC 4000, Advanced Function, require a convenience I/O
station.
5
Operator Panel
The operator performs basic operating procedures from the operator panel.
Chapter 1. Introduction
5
|
|