IBM TotalStorage 3494 Tape Library, Руководство оператора

Страница: 279 / 605

Insert Moves the selected volumes to the Insert category list box.
Eject Moves the selected volumes to the Eject category list box.
Take action
Confirms and activates a request to move volumes to the selected category.
Cancel
Closes Manage Insert Volumes window without saving any of the changes.
Volser ranges
Opens the Volser Ranges window (see Figure 142 on page 238).
Refresh
Refreshes the Manage Insert Volumes window.
Help
Provides help about the Manage Insert Volumes window.
Note: Only 50 physical volumes are displayed. If more than 50 Insert volumes
exist, then –More– is displayed at the bottom of the list box.
Manage Export-Hold Volumes
Note: This window does not apply to the TS7700 Virtualization Engine.
The Manage Export-Hold Volumes window (Figure 153) allows you to move
Exported Stacked Volumes in the Export-Hold category to the Import category. You
can also eject the Exported Stacked Volumes from the 3494 Tape Library.
The Manage Export-Hold Volumes window has the following push buttons:
Select all
Selects all volumes within the current list box.
Figure 153. Manage Export-Hold Volumes Window
Chapter 6. Advanced Operating Procedures
253