IBM TotalStorage 3494 Tape Library, Руководство оператора

Страница: 249 / 605

Note: Unless specifically noted, throughout windows in the commands menu, the
term VTS refers either to VTS or the TS7700 Virtualization Engine.
The following options are available on the Commands menu:
Cleaning
Allows you to select the following options:
Schedule Cleaning
Schedule the cleaning of the tape drives based on time or usage
(see “Schedule Cleaning” on page 229).
Eject a Cleaner Cartridge
Eject a selected cleaner cartridge (see “Eject a Cleaner Cartridge”
on page 232).
Cleaner Masks
Change cleaner masks (see “Set Cleaner Masks” on page 233).
Send message to host consoles...
Opens a window where you can enter a message (70 characters maximum).
The message is then sent to all the hosts (see “Send Message to Host
Consoles” on page 234).
Add message to transaction log...
Opens a window where you can directly add a message (70 characters
maximum) to the transaction log (see “Add Message to Transaction Log”
on page 234).
Promote a command in the queue...
Opens a window where you can select one or more requests in the
command queue to be promoted (see “Promote a Command in the Queue”
on page 235).
System management
Allows you to select the following:
Figure 134. Commands Menu
Chapter 6. Advanced Operating Procedures
223