IBM ThinkPad Ultrabay 2000 Drive, Руководство пользователя

Страница: 16 / 42

Note: For Windows 95, the DVD movie player is supported by Windows 95
OSR2.0 or later versions. You can check which version of Windows 95
you are using by doing the following:
1. Click Start , move the cursor to Settings , and then click Control
Panel .
2. Double-click System .
Read the numbers under “System”.
v
4.00.950B means that your version is Windows 95 OSR2.0 or
OSR2.1.
v 4.00.950C means that your version is Windows 95 OSR2.5.
Enabling the DMA setting
This section explains enabling the DMA setting with Windows 2000 and
Windows XP.:
For Windows 2000
1.
Click Start , move the cursor to Settings , and click Control Panel .
2. Double-click System .
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click IDE ATA/ATAPI controller to pull down the submenu.
6. Double-click Secondary IDE . (Double-click Primary IDE if you are using
the ThinkPad A21e computer.)
7.
Select the
DMA is available
as the Transfer Mode.
8.
Click
OK
.
9.
Click Close to close System Properties window. A message displays,
informing you that the system settings have changed.
10. Click OK to restart the system.
For Windows XP
1. Click Start , move the cursor to My Computer , and click on it.
2. Click on View system information under System Tasks.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click IDE ATA/ATAPI controller to pull down the submenu.
6. Double-click Secondary IDE . (Double-click Primary IDE if you are using
the ThinkPad A21e computer.)
7.
Click the Advanced Settings tab.
8.
Select DMA if available as the Transfer Mode.
9.
Click OK .
8
ThinkPad CD-RW/DVD-ROM Combo IV Ultrabay 2000 Drive: User’s Guide