IBM System x3690 X5, Руководство по обслуживанию, Страница: 186 / 464

Table 9. Event message and the device on which the fan is located (continued)
Event message Physical fan location Function
Numeric sensor "Fan 4A
Tach" Host server fan 4 speed
Numeric sensor "Fan 5A
Tach" Host server fan 5 speed
Numeric sensor "MEU Fan 1
Tach" MAX5 fan 1 speed
Numeric sensor "MEU Fan 2
Tach" MAX5 fan 2 speed
Numeric sensor "MEU Fan 3
Tach" MAX5 fan 3 speed
Numeric sensor "MEU Fan 4
Tach" MAX5 fan 4 speed
Numeric sensor "MEU Fan 5
Tach" MAX5 fan 5 speed
Integrated management module (IMM) error messages
The following sections describe the IMM error messages and suggested actions to
correct the detected problems the server or the MAX5 memory expansion module.
For more information about IMM, see the
Integrated Management Module User's
Guide at http://www.ibm.com/systems/support/supportsite.wss/
docdisplay?lndocid=MIGR-5079770&brandind=5000008.
Server IMM error messages
The following table describes the IMM error messages and suggested actions to
correct the detected server problems.
For IMM error messages that are generated when the MAX5 is attached to the
System x3690 X5 server, see “IMM error messages detected when a MAX5 is
attached to the server” on page 221.
Table 10. System x3690 X5 IMM error messages
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
v See Chapter 4, “Parts listing, System x3690 X5 Types 7147, 7148, 7149, and 7192,” on page 249 to determine which components
are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service
technician.
Event ID Message Severity Description Action
80010002-2801xxxx Numeric sensor CMOS VBAT going
low (lower non-critical) has asserted. Info Sensor has reported
CMOS battery
power change from
normal to
non-critical state. Information only; no action
is required.
80010202-0701xxxx Numeric sensor Planar 5V going low
(lower critical) has asserted. Error A lower critical
sensor going low
has asserted. (Trained service technician
only) Replace the system
board.
80010202-0701xxxx Numeric sensor Planar 3.3V going low
(lower critical) has asserted. Error A lower critical
sensor going low
has asserted. (Trained service technician
only) Replace the system
board.
80010202-2801xxxx Numeric sensor Planar VBAT going
low (lower critical) has asserted. Error A lower critical
sensor going low
has asserted. Replace the 3 V battery.
168
System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide