IBM System x3610, Руководство по диагностике и обслуживанию

Страница: 67 / 144

Low-profile
PCI Express x8
adapter
Low-profile
PCI 33 MHz
adapter
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 43.
2. Turn off the server and peripheral devices and disconnect all power cords and
external cables.
3. Pull the server out of the rack; then, remove the cover (see “Removing the
cover” on page 46).
4. Disconnect any cables from the adapter.
5. Remove the screw that holds the adapter in the slot.
6. Carefully grasp the adapter by its top edge or upper corners, and pull the
adapter from the PCI slot.
7. If you are instructed to return the adapter, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Installing an adapter
This topic describes installing an adapter in a PCI slot.
Slot 2
PCI 33 MHz
Slot 4
PCI Express x8 Slot 3
PCI Express x8
Slot 1
PCI 33 MHz
To install an adapter, complete the following steps.
Chapter 4. Removing and replacing server components
49