IBM System x3610, Руководство по диагностике и обслуживанию

Страница: 23 / 144

CD/DVD-eject button: Press this button to release a CD or DVD from the CD/DVD
drive.
CD/DVD drive activity LED: When this LED is lit, it indicates that the CD-RW/DVD
drive is in use.
Rear view
The following illustration shows the connectors and LEDs on the rear of the server.
Power supply
status LED
Power-cord
connector Mouse
connector
Keyboard
connector
Ethernet 1
speed LED Serial
connector
Video
connector
Ethernet 1
connector
Ethernet 2
connector
USB
connector 1
USB
connector 2
USB
connector 3
USB
connector 4
Ethernet 2
speed LED
Ethernet 1
link / activity LED Ethernet 2
link / activity LED
Systems-management
Ethernet activity LED
Systems-management
Ethernet speed LED
Systems-management
Ethernet connector
Power-cord connector: Connect the power cord to this connector.
Mouse connector: Connect a PS/2 mouse to this connector.
Serial connector: Connect a 9-pin serial device to this connector. The BMC can
take control of the serial port to perform text console redirection and to redirect
serial traffic, using Serial over LAN (SOL).
Ethernet connectors: Use either of these connectors to connect the server to a
network.
Ethernet link/activity LED: This LED is on each Ethernet connector. When this
LED is lit, it indicates that there is an active link connection on the 10BASE-T,
100BASE-TX, or 1000BASE-TX interface for the Ethernet port. When this LED is
flashing, it indicates that the server is transmitting to or receiving signals from the
Ethernet LAN that is connected to the Ethernet port.
Ethernet speed LED: When this LED is lit and is amber, it indicates that the
Ethernet network speed is 1 Gbps. When this LED is lit and is green, it indicates
that the Ethernet network speed is 10 Mbps or 100 Mbps.
USB connectors: Connect a USB device, such as USB mouse, keyboard, or other
USB device, to any of these connectors.
Systems-management Ethernet speed LED: When this LED is lit and is amber, it
indicates that the Ethernet network speed is 1 Gbps. When this LED is lit and is
green, it indicates that the Ethernet network speed is 10 Mbps or 100 Mbps.
Chapter 1. Introduction
5