IBM System x3100 M3, Инструкция по установке и эксплуатации

Страница: 78 / 94

Note: The BMC defaults to DHCP. If a DHCP host is not available, you can
select Static in Configuration Source and specify the IP settings (such as IP
address and subnet mask). You may need to obtain this information from your
network administrator.
5. Exit from the Setup utility.
Logging on to the Web interface
To log on to the Web interface to use the remote presence functions, complete the
following steps:
1. Open a Web browser on a computer that connects to the server and in the
address or URL field, type the IP address or host name of the BMC to which
you want to connect.
2. On the Login page, type the user name and password. If you are using the
BMC for the first time, you can obtain the user name and password from your
system administrator. All login attempts are documented in the event log.
Note: The BMC is set initially with a user name of USERID and password of
PASSW0RD (passw0rd with a zero, not the letter O). You have read/write
access. You must change the default password the first time you log on.
BIOS Configuration Utility program
The BIOS Configuration Utility (BCU) program is an alternative to the Setup utility
for modifying BIOS settings. Use the BCU program online or out of band to modify
BIOS settings from the command line without the need to restart the system to
access the Setup utility.
Use the command-line interface to issue setup commands. You can save any of the
settings as a file and run the file as a script. The BCU program supports scripting
environments through a batch-processing mode.
For more information and to download the BCU program, go to
http://www.ibm.com/systems/support/.
62
System x3100 M3 Type 4253: Installation and User’s Guide