IBM System x3100 M3, Инструкция по установке и эксплуатации

Страница: 70 / 94

Starting the Setup utility
To start the Setup utility, complete the following steps:
1. Turn on the server.
Note: If you are connecting the server to an ac power source for the first time,
do not press the power-control button until the power LED flashes.
2. When the prompt Press <F1> to enter Setup is displayed, press F1. If you
have set an administrator password, you must type the administrator password
to access the full Setup utility menu. If you do not type the administrator
password, a limited Setup utility menu is available.
3. Select settings to view or change.
Setup utility menu choices
The following choices are on the Setup utility main menu. Depending on the version
of the firmware, some menu choices might differ slightly from these descriptions.
v
Main
Select this choice to view the revision level and release date of the firmware,
total memory information, system language, system date and time, and access
level. You can change the system date and time in this menu.
v
Advanced
Select this choice to view or change server component settings.
– Legacy OpROM Support
- Launch PXE OpROM
Select this choice to enable or disable legacy boot option for legacy
network devices with option ROM.
- Launch Storage OpROM
Select this choice to enable or disable legacy boot option for legacy storage
devices with option ROM.
– PCI Subsystem Settings
Select this choice to view or change PCI adapter settings. You can also
configure the integrated video controller options.
– ACPI Settings
Select this choice to enable or disable BIOS ACPI auto configuration and
system hibernation option.
Note: System hibernation may not take effect in some operating systems.
– CPU Configuration
Select this choice to view or change the processor settings.
– SATA Configuration
Select this choice to view or change the SATA controller settings.
– USB Configuration
Select this choice to view or change the USB controller settings.
– Super IO Configuration
Select this choice to view or change serial port0 settings.
– System Information
Select this choice to view information about the server. You cannot change
settings directly in the system information.
– Serial Port Console Redirection
54
System x3100 M3 Type 4253: Installation and User’s Guide