IBM System x3100 M3, Инструкция по установке и эксплуатации

Страница: 65 / 94

Reinstalling the side cover
If you removed the side cover, reinstall it.
Key lock
Cover-release
latch
To reinstall the side cover, complete the following steps:
1. Make sure that all cables, adapters, and other components are installed and
seated correctly and that you have not left loose tools or parts inside the server.
Also, make sure that all internal cables are correctly routed.
Note: The cover-release latch must be in the unlocked (opened) position before
you install the side cover.
2. Position the lip on the bottom edge of the side cover on the ledge on the bottom
of the chassis; then, rotate the cover up to the chassis, and then press down on
the cover release latch and push the cover completely closed until it latches
securely into place.
3. Press down on the cover-release latch and close the cover to secure it in place.
4. Lock the side cover.
Chapter 2. Installing optional devices
49