background image

Appendix B. Notices 

This information was developed for products and services offered in the U.S.A. 

IBM may not offer the products, services, or features discussed in this document in 
other countries. Consult your local IBM representative for information on the 
products and services currently available in your area. Any reference to an IBM 
product, program, or service is not intended to state or imply that only that IBM 
product, program, or service may be used. Any functionally equivalent product, 
program, or service that does not infringe any IBM intellectual property right may be 
used instead. However, it is the user's responsibility to evaluate and verify the 
operation of any non-IBM product, program, or service. 

IBM may have patents or pending patent applications covering subject matter 
described in this document. The furnishing of this document does not give you any 
license to these patents. You can send license inquiries, in writing, to: 
   

IBM Director of Licensing 

   IBM 

Corporation 

   

North Castle Drive 

   Armonk, 

NY 

10504-1785 

   U.S.A.

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS 
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS 
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 
OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE. Some states do not allow disclaimer of express or 
implied warranties in certain transactions, therefore, this statement may not apply to 
you. 

This information could include technical inaccuracies or typographical errors. 
Changes are periodically made to the information herein; these changes will be 
incorporated in new editions of the publication. IBM may make improvements and/or 
changes in the product(s) and/or the program(s) described in this publication at any 
time without notice. 

Any references in this information to non-IBM Web sites are provided for 
convenience only and do not in any manner serve as an endorsement of those 
Web sites. The materials at those Web sites are not part of the materials for this 
IBM product, and use of those Web sites is at your own risk. 

IBM may use or distribute any of the information you supply in any way it believes 
appropriate without incurring any obligation to you. 

Trademarks 

The following terms are trademarks of International Business Machines Corporation 
in the United States, other countries, or both: 

 

IBM FlashCopy 

System 

IBM (logo) 

i5/OS 

TechConnect 

Active Memory 

iDataPlex 

Tivoli 

Active PCI 

IntelliStation 

Tivoli Enterprise 

Active PCI-X 

NetBAY 

Update Connector 

 

© Copyright IBM Corp. 2011 

45

Содержание System x iDataPlex dx360





































































Отзывы: