IBM System x iDataPlex dx360 M2, Руководство по диагностике и обслуживанию

Страница: 152 / 264

2. Orient the cover over the rear of the chassis so that the retention tabs on the
cover align with the tabs in the chassis.
3. Slide the cover onto the chassis until the cover-release buttons click into place.
4. Install the chassis in the iDataPlex rack (see “Installing the 2U chassis in a Type
7825 iDataPlex rack” on page 187).
Removing the 3U chassis top cover
To remove the 3U chassis top cover, complete the following steps.
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 123.
2. If the chassis is installed in an iDataPlex rack, remove it (see “Removing a 3U
chassis from a Type 7825 iDataPlex rack” on page 190).
3. Press the two cover-release buttons and slide the cover toward the rear of the
chassis to remove it.
4. If you are instructed to return the 3U chassis top cover, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
136
System x iDataPlex dx360 M2: Problem Determination and Service Guide