IBM System x iDataPlex dx340, Руководство по диагностике и обслуживанию

Страница: 98 / 196

Removing the 2U chassis top cover
To remove the 2U chassis top cover, complete the following steps.
Release buttons
Top cover
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 71.
2. If the chassis is installed in an iDataPlex rack, remove it (see “Removing the 2U
chassis from a Type 7825 iDataPlex rack” on page 123).
3. Press the two cover-release buttons and slide the cover toward the rear of the
chassis to remove it.
4. If you are instructed to return the 2U chassis top cover, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
82
System x iDataPlex dx340 Types 6385, 6386, 6389, 7831, 7832, and 7834: Problem Determination and Service Guide