IBM System x iDataPlex dx340, Руководство по диагностике и обслуживанию

Страница: 149 / 196

Installing the 3U chassis power supply and power-supply paddle card
To install the 3U chassis power supply and power-supply paddle card, complete the
following steps:
1. Touch the static-protective package that contains the power supply to any
unpainted metal surface on the outside of the 3U chassis; then, remove the
power supply from the package.
2. Lower the power supply into the 3U chassis.
3. Install the retention bracket.
Note: Make sure that the clips on the side of the chassis secure the retention
bracket and that the bracket presses firmly against the tabs on the power
supply.
Chapter 4. Removing and replacing server components
133