Removing the PCIe adapter bay cover
To remove the adapter bay cover from the I/O enclosure, complete the following
steps.
Screws
Slot cover
PCIe bay cover
I/O enclosure
PCI slots
Tabs
Adapter
End of
Bay cover
1. Read the safety information that begins on page vii and “Installation guidelines”
2. If the system-board tray is installed in a chassis, remove it (see “Removing the
system-board tray from a 2U chassis” on page 75 or “Removing the
system-board tray from a 3U chassis” on page 77).
3. Remove the I/O enclosure (see “Removing an expansion enclosure from a
system-board tray” on page 73).
4. Carefully set the I/O enclosure on a flat, static-protective surface.
5. Remove the two screws that secure the PCIe adapter bay cover to the I/O
enclosure and save the screws for future use.
6. Slide the PCIe adapter bay cover out of the mounting tabs and remove it from
the I/O enclosure.
7. If you are instructed to return the PCIe adapter bay cover, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Chapter 4. Removing and replacing server components
113
Содержание System x iDataPlex dx340
