IBM System Storage TS2900, Руководство по установке, эксплуатации и обслуживанию, Страница: 71 / 257

Chapter 3. Installation and Configuration
3-27
• Privacy — Privacy service encryption and decryption algorithm, DES or AES.
When an algorithm is specified, a privacy password and confirmation of the
password are required.
6. Select the event level to report in the Trap event field.
7. Click Test to send a test trap notification to the enabled IP addresses.
8. Click Submit to enable the settings.
Managing User Access
Figure 3-29. User access settings
Note: This is an optional procedure.
To add users able to access the library using the Web User Interface, complete the
following procedure.
1. Expand Configure Library , if necessary, and click on User Access in the left
navigation pane of the Web User Interface.
2. Select the Add action in the pop-up menu.
• Add — To add new users.
• Modify — To change the selected user’s access role and/or password.
• Remove — To delete the selected user from the system.
Figure 3-30. Add User dialog
3. Enter the user name and password information in the dialog box.
4. Assign a user access role.
a29z0122
a29z0139