IBM System Storage TS2900, Руководство по установке, эксплуатации и обслуживанию

Страница: 108 / 257

4-30
TS2900 Tape Autoloader Setup, Operator, and Service Guide
Servicing the Library
Running Encryption Key Path Diagnostics
Figure 4-49. Key Path Diagnostics screen
Use Service Library
→
Key Path Diagnostics to run diagnostic tests of the encryption
key path if the drive in your Model S4H library is set up for library managed
encryption. These run tests for the tape drives, network connection, EKM path, and
the EKM configuration.
The test consists of four parts:
•
Drive Test — This test ensures that the LDI is functioning properly.
• Ethernet Test — In this test, the library pings each EKM server IP address.
• EKM Path Test — In this test, the library performs an EKM communication test on
each EKM server IP address that passed the Ethernet Test.
• EKM Config Test — This test confirms that a drive is correctly configured in the
EKM to service key requests.
Click Start to run the diagnostics tests.
Viewing Operator Interventions
Figure 4-50. Operator Interventions screen
Use Service Library
→
Operator Interventions to display a log history summary of
information, warning, and error events that have occurred for the selected library
component units.
a29z0142
a29z0130